How to connect the hose joint to the hose

Oct 11, 2023|

The connection between the rubber hose joint and the rubber hose is usually completed through a rubber hose buckle press. First, the rubber hose is cut according to the required size, then the measured size of the rubber hose is peeled, and then the rubber hose joint is installed. Finally, a rubber hose buckle press is used to press it in place. The specific steps are as follows:
1. Select a suitable rubber hose and cut it to length.
2. Peel off the outer glue at both ends of the hose.
3. Select the appropriate type of hose joint.
4. Install the core rod of the joint in sequence (with oil) and the outer sleeve of the rubber hose joint.
5. When pressing with a press, pay attention to selecting the appropriate amount of pressing.
6. After the compression is completed, clean the rubber debris on the inner wall of the hose, and then install the dust cap, sealing ring, and retaining ring.

Send Inquiry